Global Service Hotline


Single Wavelength Optical Power Meter



Laser Power Meter:

The laser power meter is a professional instrument specially developed to measure the optical power of laser. It uses the optical signal induced by the optical silicon electromagnetic reception feedback to be clearly and accurately displayed through the display panel in the form of current or voltage, so that The operator can easily and intuitively judge the quality of the laser product and the output light rate.

Functions: 1. Optical power measurement 2. Current measurement 3. DC 3V, 4.5V, 5V voltage output

Main Technical Parameters:

Wavelength: 405nm 532nm 635nm 650nm 808nm 980nm 1064 nm, one to three wavelengths can be selected.

Power Measurement Range: 0-3W optional

Display: LCD digital display.

Measurement Accuracy: 0.1mw

Power Supply Mode: AC220V

Dimensions: 160 X 65 X 120


1. First, determine that the power of the product being measured meets the maximum range of the current optical power meter, and then select the corresponding effective wavelength.

2. Turn on the power supply, turn on the instrument switch, directly match the output optical port of the product under test to the light source inlet of the silicon electromagnetic device, and find the maximum value, which is the output optical power.


1. Please turn off the power when finished, and unplug the input power cord, laser probe and DC belt clamp output cord if not used for a long time.

2. Please handle it with care, especially to prevent the ground glass piece and silicon photocell in the probe from falling off or being damaged due to vibration.

3. For matters needing attention when using laser tube components, please refer to the specialized technical information of the Optoelectronics Department of our company. If there is any problem, please ask a professional or send it back to the supplier for repair.

Recommended information

Online Service
Service Hotline

Service Hotline


WeChat Inquiry
Back to top